AC electric motor rewinding and rebuilding
Single-phase motors
Polyphase motors less than 50 hp (37 kW)
POLYPHASE MOTORS UP TO 200 HP (150 kW)
POLYPHASE MOTORS 200 HP (150 kW) AND OVER
POLYPHASE MOTORS WITH FORMED COILS
POLYPHASE MOTORS OVER 600 VOLTS
WOUND ROTORS
AC generator rewinding less than 50 kW
AC generator rewinding 50 kW and over
Brush shifting motors
ISO 9000 Series registration.

Transformer servicing
Air-cooled rewinding
Oil-filled rewinding

Electric/electronic control servicing
Electromechanical field servicing
Electronic field servicing

Load testing (Dynamometer ranges)
Under 125 hp (93 kW) @ 1800 rpm
125 to 250 hp (93 to 186 kW) @ 1800 rpm
251 to 500 hp (187 to 373 kW) @ 1800 rpm

Area devoted to service work : 50,000 sq. ft (4,646 sq. m) and over
Area regularly serviced (radius from plant) : 200 miles (321 km) or over
Largest crane or hoist capacity : 10 tons (9,072 kg) or over
Height and width of largest service center entrance : At least 12 x 14 ft (3.6 x 4.3 m)
Lathe equipment : 48 in (121 cm) or more
Dynamic balancing equipment : 5,000 lbs (2,268 kg) and over
Dipping equipment : At least 6 x 6 x 6 ft (1.8 x 1.8 x 1.8 m)
Vacuum-pressure impregnation equipment (VPI) : Resin: Polyester
Vacuum-pressure impregnation equipment (VPI) : Diameter: 3 - 5.99 ft (0.914 - 1.826 m)
Bake oven : At least 8 x 8 x 8 ft (2.4 x 2.4 x 2.4 m)